<address id="3l13x"><cite id="3l13x"><nobr id="3l13x"></nobr></cite></address>

          Pneumatic 4 Way Ball Valve

          -Size:DN15~DN150
          -Connection standard:PN10/16, ANSI150, DIN16, JIS10K, 16K
          -Working temperature:-15~300℃
          -Working pressure:PN10~PN64
          -Body:WCB、SS304、SS316、SS304L、SS316L
          -Ball:WCB、SS304、SS316、SS304L、SS316L
          -Seat:PTFE、Hard metal seal
          -Medium:Steam, air, gas, ammonia, oil, water, etc
          -Operating:Pneumatic

          Ordering hotline:021-54150349

          Immediately consult
          • Product introduction
          • Product parameters
          Only needs to operate wrench or actuator to rotate the ball 90 degrees for 4 way ball valve. It can switch the flow direction of the two kinds of media at the same time. It is convenient and fast to realize the multi-purpose effect of one valve. The valve core and light neck are made of Austenitic stainless steel, and the seat material is PTFE, which can achieve good corrosion resistance and prolong the service life of the valve.

          2. Seat
          3. Body
          4. Ball
          5. Trunion mounted valve seat
          6. Wear-resistant sleeve
          9. Stem
          10. Thrust washer
          11. O-ring
          12. Packing
          13. Packing ring